Main product image
BACK TO PRODUCT CATEGORY
PT-RW620
Key Features

Laser 1-Chip DLP, 6,200 lumens (center), WXGA

High brightness and excellent image quality with laser light source

Maintenance free up to 20000 hours with dust-resistant optical block and long lasting laser engine

Free 360-degree installation

10,000:1 contrast ratio

6,200 lumens Solid Shine laser projector designed for intensive usage and long lasting brightness in education, museums, exhibitions and digital signage applications.

Wide spectrum colour with up to 6.200 lm (centre) brightness

With the next generation of the DLP™ technology, the RZ660 series delivers high resolution in detail and the dual laser modules outputting a brightness of up to 6,200 lm (center). Due to the quartet colour harmonizer, the energy loss of the light source is reduced and the robust and heat resistant phosphor wheel the of PT-RZ660 solid shine laser series produces scintillating images with unfailing reliability.

Outstanding white balance and colour reproduction

The quartet colour harmonizer wheel mechanism captures a wider colour space than comparable laser projectors, which allows white to be reproduced realistically on the screen. Unlike conventional projectors where it’s difficult to achieve an accurate white balance which casuses images to appear with a distracting greenish tint, Panasonic’s quartet colour harmonizer eliminates this negative impact by adding an additional yellow segment to the colour wheel to produce whites with unparalleled accuracy for natural and realistic picture quality.

Maintain image quaility for longer use

Thanks to the long lasting dual solid state laser modules, there are no lamps which needs to be replaced. The image colours and brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality preserves longer.

Dependable 24/7 operation with failover protection

With the dual drive laser optical engine the laser diodes are grouped into two discrete modules. A failsafe redundancy circuit works to minimise the brightness- and colour uniformity loss if a laser diode fails. Together with the 20000 hours*1 maintenance-free projection period, the PT-RZ660 series is ideal for mission critical applications.

Dynamic light control delivers better contrast

The PT-RZ660 series directly modulates laser power output to achieve a high contrast with low power consumption. A digitally controlled frame-by-frame scene-linking modulation ensures highly precise output adjustment, while the accurate 10,000:1 contrast ratio is delivered even when bright and dark scenes are frequently interchanging.

Vivid images in bright environments

Panasonics premium system daylight view 3 prevents images from washing out in well-lit envorinments and enhances brightness perception in multi-projector mapping applications by adjusting sharpness, gamma curves and correcting colours. The result is a greater visual impact even in challenging conditions.

Detail clarity processor 3 - Sharpness in the finest details

This unique Panasonic circuit optimises the sharpness of each image based on the super high, high, medium and low frequency components of the extracted image information. The resulting images are expressed with natural and convincing realism.

Dust-resistant airtight optical block

The optical block of the PT-RZ660 series is airtight, ensuring consistent, long-lasting image quality for up to 20000 hours* without maintenance. The optical block design passed stringent testing to assure utmost realiability in environments with up to 0,15mg of particulate matter per cubic meter*2. The structure prevents brightness degration from dust intrusion.

 

Select a mode to maintain image quality for longer

Approximatley 20000 hours of continuous operation

In Normal Mode, the PT-RZ660 series can operate continuously for about 20000 hours*1. In Eco Mode, this is extended to around 24000 hours. These modes enhance suitability for education and signage appliacation.

Long Life mode offers up to 10 years maintenance free

In environments where full grightness is not necessary, such as survaillance, control- and simulation-rooms, constant operation modes extend light-source replacement up to 87.600 hours*2 in Long Life Mode 3 - about 10 years of 24/7 operation with consistent brightness and colour.

User operation modes

In addition to present operation modes, the PT-RZ660 series can be customised to achieve your preferred balance of brightness performance or extended life.

Original Contrast Sync and Shutter Sync functions

The PT-RZ660 series is among the world's first to feature contrast and shutter sync functions for multi screen and mapping applications. Contrast Sync allows the projector's digitally modulated contrast function to be synchronised over the network for consistent picture quality across the screens, while Shutter Sync incorporates a master/slave principle to synchronise shutter on/off timing between all networked projectors. It includes simultaneous face-in and fade-out functions.

Geometric Adjustment adapts special projection surfaces

Geo Adjustment adapts the image for projection into spherical, cylindrical and otehr sperical shaped screens. Fine-tuning is performed with the remote control with no external equipment needed. paired with Multi-Screen support system, highly creative mapping presentations are possible in variety of event and staging applications.

Single-cable Digital Link control and video connection

Upward HDBaseT™ compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150m. Add an optional Digital Link switcher (ET-YFB200) or Digital Interface Box (ET-YFB100) to further simplify installation in large venues while reducing cost and improving reliability at the same time.

 

*1 At this time the brightness will have decreased to approx. haolf of it's original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or check-up at point of purchase after approx. 20000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement parts other than the light source may be required in a shorter period. *2based on American Society of Heating, Refrigiating and Air-Condition engineers [ASHRAE] and Japanese  building maintenance association guidelines *3 With operation mode set to long life 3. Long life mode is tested in conditions with 0.015mg of particulate matter per cubic meter (simulating rear-box projection environment), which is not compliant with the ASHRAE. 24 hours/ day x 365 days/year x 10 years= 87.000 hours. Replacement parts other than the light source may be required in a shorter period.

 

 

 

Show more

Technology

Click an icon to find out more about the technology used

DIGITAL LINK Logo Official JPEG 247 Operation Logo PNG SOLID SHINE Laser Logo JPEG 360 Degree Free Installation Logo JPEG (EU) Solid Shine Laser Warranty
  • Case Studies
  • White Papers
  • Brochures
  • DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    Lineup / Solution: SOLID SHINE Projector Lineup Catalog PDF (English)
Product
Image Data
Spec Files
Marketing
Spec Sheets
Brochures
White Paper
Case Studies
Marketing Videos
Technical
Operating Instructions
Technical Documents

Service and Support
  • DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    Lineup / Solution: SOLID SHINE Projector Lineup Catalog PDF (English)
    Wed, 28/08/2019 - 18:04
    Download pdf - 6.5 MB
  • ACMI Wonderland case study
    ACMI Wonderland case study
    ACMI Wonderland case study
    Tue, 24/09/2019 - 08:49
    Download pdf - 1.66 MB
    ACMI Wonderland video case study
    ACMI Wonderland video case study
    ACMI Wonderland video case study
    Tue, 24/09/2019 - 08:51
    View video
  • ACMI Wonderland video case study
    ACMI Wonderland video case study
    ACMI Wonderland video case study
    Tue, 24/09/2019 - 08:51
    View video
  • PT-RZ770/RZ660 Series Operating Instructions (English)
    PT-RZ770/RZ660 Series Operating Instructions (English)
    Operating Instructions: RZ770/RW730/RZ660/RW620 (English)
    Wed, 04/09/2019 - 14:41
    Download pdf - 20.76 MB
  • PT-RZ970/RW930/RX110/RZ870/RZ770/RW730/RZ660/RW620/RZ670/RW630 RS-232C control spec (English/Japanese) Asia & Oceania
    PT-RZ970/RW930/RX110/RZ870/RZ770/RW730/RZ660/RW620/RZ670/RW630 RS-232C control spec (English/Japanese) Asia & Oceania
    RS-232C control spec: RZ970/RW930/RX110/RZ870/RZ770/RW730/RZ660/RW620/RZ670/RW630 (English/Japanese) Asia & Oceania version
    Mon, 23/09/2019 - 02:00
    Download pdf - 769.99 KB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Specification documents
Power Supply AC100 - 240V 7.1A 50Hz/60Hz
Power Consumption 700W NORMAL: 499W ECO: 428W LONG LIFE1: 287 - 402W LONG LIFE 2: 262 - 402W LONG LIFE 3: 238 - 402W SHUTTER: 69W STANDBY MODE [ECO]*1: 10.2W STANDBY MODE [NORMAL]: 3W STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft), ICE62087: 2008 Broadcast contents, Picture mode: Standard, Dynamic Contrast2
BTU Value Max 2,389BTU
Lens | PT-RW620B/W Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm
Lens | PT-RW620LB/LW Optional powered zoom/focus lenses and xed-focus lens
Light Source Laser Diode Laser class 1(Class3R for US models) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3 Dynamic Contrast3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3)
Screen Size 1.27- 15.24 m (50-600 inches) (16:10 aspect ratio) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
Brightness*3 6,200 lumens (Center)*2/ 6,000 lumens*3 6,000 lumens (Half luminance) (NORMAL) 4,800 lumens (Half luminance) (ECO) 2,400 lumens (Constant luminance) (LONG LIFE1) 2,000 lumens (Constant luminance) (LONG LIFE2) 1,600 lumens (Constant luminance) (LONG LIFE3)
Center-to-Corner Uniformity*3 90%
Contrast*3 10,000:1 (All White/All Black) (Dynamic Contrast3)
Scanning Frequency | HDMI/DVI-D fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz 525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible with non-interlaced signals only
Scanning Frequency | RGB fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
Scanning Frequency | YPBPR (YCBCR) 525i (480i): fH 15.73 kHz; fV 59.9 Hz, 625i (576i): fH 15.63 kHz; fV 59.9 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency | Video/S-Video fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift Vertical: +60%, -16%(powered), Horizontal: +30%, -10% (When using the ET-DLE085/DLE105, +28%, -10%) (powered) NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
Installation Ceiling/floor, front/rear, 360 degree free installation
Terminals | HDMI In HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals | DVI-D In DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only
Terminals | RGB 1 In BNC x 5
Terminals | RGB 1 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 In | Y/C Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 In | Video 1.0Vp-p, 75 ohms
Terminals | RGB 2 In D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | Serial/Multi Projector Sync In D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial/Multi Projector Sync Out D-sub 9-pin (male) x 1 for link control
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control (for wired remote control)
Terminals | Remoter 2 In D-sub 9-pin (female) x1 for external control (parallel)
Terminals | LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 1) Deep Color, HDCP
Power Cord Length 3.0 m (9 ft 10 in)
Cabinet Materials Molded plastic
Dimensions (W x H x D) | PT-RW620B/RW620W 498 x 200*5 x 581mm (19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
Dimensions (W x H x D) | PT-RW620LB/RW620LW 498 x 200*5 x 538 mm (19-19/32 x 7-7/8*5 x 21-3/16in) without lens
Weight | PT-RW620B/RW620W Approx. 23.1kg (50.9lbs) with supplied lens
Weight | PT-RW620LB/RW620LW Approx. 22.3kg (49.2lbs) without lens
Operation Noise 35 dB
Operating Temperature 0-45 °C (32-113 °F) * 6
Operating Humidity 10%-80% (no condensation)
Note *1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate. *2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal). *5 with legs at shortest position. *6 Limits the luminance when used in locations from 0m to 2,700m (0ft to 8,858ft) above sea level at ambient temperatures of 35°C (95°F) or higher, or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher.
Brightness 6,200 lumens (Center)/ 6,000 lumens
Resolution WXGA 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
Technology 1-Chip DLP Laser
DLP™ Chip | Panel Size 16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method DLP™ chip x 1, DLP™ system
DLP™ Chip | Pixels 1,024,000 (1280 x 800) x 1, total of 1,024,000 pixels