7,200 lumens Solid Shine laser projector designed for intensive usage and long lasting brightness in education, museums, exhibitions and digital signage applications.
Wide spectrum colour with up to 7,200 lm (center) brightness
With the next generation of the DLP™ technology, the RZ770 series is delivering high resolution in detail with the dual laser modules outputting a brightness of up to 7,200 lm (center). Due to the quartet colour harmonizer, the energy loss of the light source is reduced and the robust and heat resistant phosphor wheel the of PT-RZ770 solid shine laser series produces scintillating images with unfailing reliability.
Outstanding white balance and colour reproduction
The quartet colour harmonizer wheel mechanism captures a wider colour space than comparable laser projectors, which allows white to be reproduced realistically on the screen. With conventional projectors, it’s difficult to achieve an accurate white balance causing images to appear with a distracting greenish tint. Panasonic’s quartet colour harmonizer eliminates this negative impact by adding an additional yellow segment to the colour wheel to produce whites with unparalleled accuracy for natural and realistic picture quality.
Maintain image quaility for longer use
Thanks to the long lasting dual solid state laser modules, no lamps will need to be replace. The image colours and brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality preserves longer.
Dependable 24/7 operation with failover protection
With the dual drive laser optical engine the laser diodes are grouped into two discrete modules. A failsafe redundancy circuit works to minimise the brightness- and colour uniformity loss if a laser diode fails. In combination with the 20000 hours*1 maintenance-free projection period the PT-RZ770 series is ideal for mission critical applications.
Dynamic light control delivers better contrast
The PT-RZ770 series directly modulates laser power output to achieve a high contrast with low power consumption. A digitally controlled frame-by-frame scene-linking modulation ensures highly precise output adjustment, while the accurate 10,000:1 contrast ratio is delivered even when bright and dark scenes are frequently interchanging.
Vivid images in bright environments
Panasonics premium system daylight view 3 prevents images from washing out in well-lit envoironments and enhances brightness perception in multi-projector mapping applications by adjusting sharpness, gamma curves and correcting colours. The result is a greater visual impact even in challenging conditions.
Detail clarity processor 3 - Sharpness in the finest details
This unique Panasonic circuit optimises the sharpness of each image based on the super high, high, medium and low frequency components of the extracted image information. The resulting images are expressed with natural and convincing realism.
Dust-resistant airtight optical block
The optical block of the PT-RZ770 series is airtight, ensuring consistent, long-lasting image quality for up to 20000 hours* without maintenance. The optical block design passed stringent testing to assure utmost realiability in environments with up to 0,15mg of particulate matter per cubic meter*2 . The structure prevents brightness degration from dust intrusion.
Select a mode to maintain image quality for longer
Approximatley 20000 hours of continuous operation
In Normal Mode, the PT-RZ770 series can operate continuously for about 20000 hours*1. In Eco Mode, this is extended to around 24000 hours. These modes enhance suitability for education and signage appliacation.
Long Life mode offers up to 10 years maintenance free
In environments where full grightness is not necessary, such as survaillance, control- and simulation-rooms, constant operation modes extend light-source replacement up to 87.600 hours*2 in Long Life Mode 3 - about 10 years of 24/7 operation with consistent brightness and colour.
User operation modes
In addition to present operation modes, the PT-RZ770 series can be customised to achieve your prefered balance of brightness performance or extended life.
Original Contrast Sync and Shutter Sync functions
The PT-RZ770 series is among the world's first to feature contrast and shutter sync functions for multi screen and mapping applications. Contrast Sync allows the projector's digitally modulated contrast function to be synchronised over the network for consistent picture quality across the screens, while Shutter Sync incorporates a master/slave principle to synchronise shutter on/off timing between all networked projectors. It includes simultaneous face-in and fade-out functions.
Geometric Adjustment adapts special projection surfaces
Geo Adjustment adapts the image for projection into spherical, cylindrical and otehr sperical shaped screens. Fine-tuning is performed with the remote control with no external equipment needed. paired with Multi-Screen support system, highly creative mapping presentations are possible in variety of event and staging applications.
Single-cable Digital Link control and video connection
Upward HDBaseT™ compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150m. Add an optional Digital Link switcher (ET-YFB200) or Digital Interface Box (ET-YFB100) to further simplify installation in large venues while reducing cost and improving reliability at the same time.
*1 At this time the brightness will have decreased to approx. haolf of it's original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or check-up at point of purchase after approx. 20.000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement parts other than the light source may be required in a shorter period. *2based on American Society of Heating, Refrigiating and Air-Condition engineers [ASHRAE] and Japanese building maintenance association guidelines *3 With operation mode set to long life 3. Long life mode is tested in conditions with 0.015mg of particulate matter per cubic meter (simulating rear-box projection environment), which is not compliant with the ASHRAE. 24 hours/ day x 365 days/year x 10 years= 87.000 hours. Replacement parts other than the light source may be required in a shorter period.
Click an icon to find out more about the technology used
There are currently no key services available.
There are currently no other services available.
|Power Supply||AC100 - 240V 8.3A 50Hz/60Hz|
|Power Consumption||825W NORMAL: 593W ECO: 508W LONG LIFE1: 333 - 477W LONG LIFE 2: 310 - 477W LONG LIFE 3: 286 - 477W SHUTTER: 72W STANDBY MODE [ECO]*1: 10.2W STANDBY MODE [NORMAL]: 3W STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft), ICE62087: 2008 Broadcast contents, Picture mode: Standard, Dynamic Contrast2|
|BTU Value||Max 2,815 BTU|
|Lens | PT-RZ770B/W||Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm|
|Lens | PT-RZ770LB/LW||Optional powered zoom/focus lenses and xed-focus lens|
|Light Source||Laser Diode Laser class 1(Class3R for US models) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3 Dynamic Contrast3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3)|
|Screen Size||1.27- 15.24 m (50-600 inches) (16:10 aspect ratio) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)|
|Brightness*3||7,200 lumens (Center)*2/ 7,000 lumens*3 7,000 lumens (Half luminance) (NORMAL) 5,600 lumens (Half luminance) (ECO) 2,800 lumens (Constant luminance) (LONG LIFE1) 2,300 lumens (Constant luminance) (LONG LIFE2) 1,900 lumens (Constant luminance) (LONG LIFE3)|
|Contrast*3||10,000:1 (All White/All Black) (Dynamic Contrast3)|
|Scanning Frequency | SDI||3G-3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, [2K/24p], [2K/25p], [2K/30p] 3G-SDI signal (YPBPR4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p, [2K/48p], [2K/50p], [2K/60p] HD-SDI signal (YPBPR4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p SD-SDI signal (YCBCR4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i)3G-|
|Scanning Frequency | HDMI/DVI-D||fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz 525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible with non-interlaced signals only|
|Scanning Frequency | RGB||fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz|
|Scanning Frequency | YPBPR (YCBCR)||525i (480i): fH 15.73 kHz; fV 59.9 Hz, 625i (576i): fH 15.63 kHz; fV 59.9 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz|
|Scanning Frequency | Video/S-Video||fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Optical Axis Shift||Vertical: +50%, -16%(powered), Horizontal: +30%, -10% (When using the ET-DLE085/DLE105, +28%, -10%) (powered) NOTE: Optical a xis shift function cannot be operated when used with the ET-DLE055. using the ET-DLE030, the optical axis is fixed.|
|Installation||Ceiling/floor, front/rear, 360 degree free installation|
|Terminals | SDI In||BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant|
|Terminals | HDMI In||HDMI 19-pin x 1, Deep Color, compatible with HDCP|
|Terminals | DVI-D In||DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only|
|Terminals | RGB 1 In||BNC x 5|
|Terminals | RGB 1 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic|
|Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)||Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | RGB 1 In | Y/C||Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms|
|Terminals | RGB 1 In | Video||1.0Vp-p, 75 ohms|
|Terminals | RGB 2 In||D-sub HD 15-pin (female) x 1|
|Terminals | RGB 2 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic|
|Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | Serial/Multi Projector Sync In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals | Serial/Multi Projector Sync Out||D-sub 9-pin (male) x 1 for link control|
|Terminals | Remoter 1 In||M3 jack x 1 for wired remote control|
|Terminals | Remoter 1 Out||M3 jack x 1 for link control (for wired remote control)|
|Terminals | Remoter 2 In||D-sub 9-pin (female) x1 for external control (parallel)|
|Terminals | LAN/DIGITAL LINK||RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 1) Deep Color, HDCP|
|Power Cord Length||3.0 m (9 ft 10 in)|
|Cabinet Materials||Molded plastic|
|Dimensions (W x H x D) | PT-RZ770B/RZ770W||498 x 200 *5 x 581mm (19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens|
|Dimensions (W x H x D) | PT-RZ770LB/RZ770LW||498 x 200 *5 x 538 mm (19-19/32 x 7-7/8*5 x 21-3/16in) without lens|
|Weight | PT-RZ770B/RZ770W||Approx. 23.2kg (51.1lbs) with supplied lens|
|Weight | PT-RZ770LB/RZ770LW||Approx. 22.4kg (49.4lbs) without lens|
|Operation Noise||36 dB|
|Operating Temperature||0-45 °C (32-113 °F) *6|
|Operating Humidity||10%-80% (no condensation)|
|Note||*1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate. *2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal). *5 with legs at shortest position. *6 Limits the luminance when used in locations from 0m to 2,700m (0ft to 8,858ft) above sea level at ambient temperatures of 35°C (95°F) or higher, or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher.|
|Brightness||7,200 lumens (Center)/ 7,000 lumens|
|Resolution||WUXGA 1,920 x 1,200 pixels|
|Technology||1-Chip DLP Laser|
|DLP™ Chip | Display Method||DLP™ chip x 1, DLP™ system|
|DLP™ Chip | Pixels||2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels|
|DLP™ Chip | Panel Size||17.0 mm (0.67 in) diagonal (16:10 aspect ratio)|